Drilling Centre

full_d637cf0d0a2bd0e130e9b1b9ccfe25dc

Code: 219106


• Drill, mill and groove accurately while both lenses blocked side by side
• Can be used as a stand or hand drill
• Compact easy to use cross table
• Storage for drills, millers and small parts
• Cross table with millimeter scale, separately available: No. 2191 11
• Lens angle changeable to minimise adjustments after frame assembly
• Inclination adjustable through dial


Size without transformer
(w x h x d): 280 x 400 x 330 mm
Speed: 5,000 to 20,000 rpm
(adjustable)
Power: 60 W
Operating voltage: 12 V
Primary connection: for 220 to 240 V
Chuck: 0.5 to 3.2 mm
Cross table surface: 200 x 70 mm
Adjusting range
for cross table: X (diagonal) 134 mm, Y (deep) 46 mm
Weight: 2.8 kg

Hand drilling machine with transformer

full_c34f729c8e8fbcae178bb1f22a52bc8b

Code: 288660


Including 6 chucks with 1.0; 1.5; 2.0; 2.4; 3.0 and 3.2 mm diameter.


Size (w x h x d): 140 x 80 x 240 mm
Voltage: 230 V
Power: 60 W
Speed: 5,000 to 20,000 rpm
(adjustable)
Weight: 2.9 kg

Xenox drilling and milling unit

full_cf1b846fad3c274ca3c360de19237d64

Code: 288661


Including 6 chucks with 1.0; 1.5; 2.0; 2.4; 3.0 and 3.2 mm diameter and drill chuck No. 2886 64.
Does not include pictured grinding wheels or polishing wheels.


Size (w x h x d): 240 x 90 x 240 mm
Voltage: 230 V
Power: 60 W
Speed: 5,000 to 20,000 rpm
Weight: 2.9 kg
288750

Code: 2887 50


• Precision measurements due to depth perceptions scale
• Fixed knob with scale
• Transmission belt drive
• Very quiet running
• Incl. machine vice No. 2887 21
• Incl. drill chuck No. 2887 11
• 6 steel clamps for shaft size from 0.8 to 3.2 mm
• Accessories: Base plate No. 2887 14, lens drilling device No. 2129 00 and locating bush No. 2887 12


Dimensions (w x h x d): 120 x 330 x 220 mm
Rated voltage: 230 V
Power rating: 85 W
Speed: 1,800 and 4,700 and 8,500 rpm
(change by adjusting the belt)
Weight: 5.7 kg
212860

Code: 212860


• Sensitive feed through steering wheel and roller bearings
• Solid, chrome steel pillar (Ø 20 mm, 280 mm long)
• The handpiece collet can be tilted to both sides in 90°
• Weight: 2 kg


Drilling machine No. 2886 61 and vice No. 2887 21 are not included.